APEPRXB
Interested in this product?
PCI/PCI-EXPRESS/PCI, 3 in 1 right angle riser
Description
APEPRXB is a PCI/PCI-EXPRESS/PCI, 3 in 1 right angle riser. It is designed specifically for Intel Adaptive slot as in the SE7230NH1, SE7221BK1 and S3000AH series of motherboards. It plugs into the adaptive slot at the slot 6 position of the motherboard. The top PCIX connector connects to the PCIX section of the adaptive slot. The middle connector is a PCI-Express X8 connector that connects directly to the PCI-Express section of the adaptive slot. The bottom connector is connected to the PCIX slot on the motherboard slot 5 via a wide cable. All connectors are mounted on the B-side of the riser card. This riser is designed for chassis with three horizontal cutouts that line up typically with the slot 6 position of the motherboards.
Picture shown above is P/N: APEPRXB-888-303-1. It is populated with a PCI-Express_X8 connector and two PCI-64 bit 3.3V connectors. The top PCI connector is located at 2.68", the middle PE connector is located at 1.88", and the bottom PCI connector is located at 1.08" height. All height dimensions are referenced to the bottom of the board. The wide cable can be ordered in various lengths, depending on the location of the PCI slots on the motherboard (one inch typical). For part number suffix definition please refer to
FAQs TQ 12.Overall dimensions: 2.86"H x 7.69"W
